Description

Product Overview

An electric air damper valve is an injection-moulded polypropylene or PVC damper fitted into a PP duct run. An actuator drives the blade to adjust the opening, so airflow volume can be controlled remotely or automatically, and the valve matches the round PP duct range from φ110mm to φ550mm.

The valve is injection moulded in PP or PVC, in beige or grey, and joins the duct run by hot air welding, with socket connection reinforcement at the joint. Standard sizes cover φ110mm to φ550mm, and custom sizes are made to order. For the straight duct this damper is fitted into, see Polypropylene Round Ducts.

An electric damper valve is one part of a ventilation system: it regulates airflow volume in the run rather than connecting or branching it, and matching fittings are available from the same supplier so a complete PP duct line can be specified from one source.

Product Selection Summary

Good Fit

• Duct runs that need airflow volume adjusted from a control point
• Automated systems that link dampers to fans, fume hoods or room pressure control
• Ducts where manual access to the damper position is impractical
• Projects needing remote or automatic airflow regulation

Conditions To Confirm

• Duct diameter (φ110mm to φ550mm, 10 standard sizes or custom) and quantity
• Material grade: PP or PVC
• Actuator requirements – supply, control signal and mounting are confirmed per project
• Gas composition, concentration, temperature and moisture at the operating point

Not a Replacement For

• Fans, airflow balancing devices, back draft dampers or gas treatment equipment

Technical Specifications

Confirmed Product Parameters

Parameter	Value
Product Type	Electric Air Damper Valve (motorized damper valve)
Material	PP (polypropylene) or PVC
Size Range	φ110-550mm – 10 standard sizes or Customized
Connection	Hot air weld; socket connection reinforcement
Fabrication	Injection molding
Color	Beige / Grey
Working Temperature	-15℃ to 80℃
Chemical Resistance	pH 1-14 (acid and alkali)
Certification	ISO9001, ISO14001, RoHS

Available Sizes (φ)

Diameter	Diameter
φ110mm	φ400mm
φ160mm	φ450mm
φ200mm	φ500mm
φ250mm	φ550mm
φ315mm
φ355mm

For sizes outside the standard range, custom valves are made to order – confirm the required diameter with the project.

Material & Performance

Because round fittings are injection moulded rather than welded from sheet, the damper keeps the same corrosion resistance as the welded duct while offering consistent moulded dimensions, smooth surfaces and a shorter production time for standard sizes.

Electric air damper valves are injection moulded from PP or PVC, both chosen for corrosive fume handling in ductwork:

• Acid and alkali resistance: the valve body withstands corrosion by acids and alkalis across a wide pH range (pH 1-14).
• Sound insulation: PP and PVC reduce vibration and noise transmitted through the fitting.
• Light weight: moulded fittings are light and easy to handle and weld on site.
• Consistent moulded dimensions: each size is produced to a standard mould, giving uniform dimensions and wall thickness across batches.
• Long service life: plastic duct systems offer a long service life under specified operating conditions; limits depend on the material grade selected.
• Anti-condensation: the material conducts heat poorly, reducing condensation and heat loss at the fitting.

Working temperature and service limits follow the material grade selected – PP or PVC – and are confirmed against the operating conditions when quoting. The material grade applies to the whole fitting, so a single grade can be specified across the duct, fittings and accessories in the run.

Applications

Automated Flow Control

Electric damper valves are fitted where airflow volume must be regulated by a control system rather than by hand:

• Fume hood control – adjusting exhaust volume with the hood in use
• Fan and system coordination – opening or closing with fan start and stop
• Room pressure control – trimming supply or exhaust to hold the room balance
• Central control points – adjusting branch volumes from a panel or controller

The actuator rotates the blade to a set opening, so the valve can be opened, closed or held at an intermediate position for volume control. Because the actuator moves the blade, the damper can be adjusted without entering the duct and without manual access to the valve position.

Selection Notes & Quotation Information

Electric or Manual Damper?

An manual air damper valve is adjusted by hand at the damper. An electric damper valve is driven by an actuator, so it can be adjusted remotely, automatically or from a control system. Choose the electric version where the damper must respond to a controller, a schedule or a linked device; choose the manual version where a hand adjustment at the duct is sufficient.

Back Draft or Electric Damper?

A back draft damper is an automatic one-way valve that stops backflow but does not regulate volume. An electric damper valve regulates airflow volume by adjusting the opening. The two serve different functions and can both appear in one system.

To Quote Electric Air Damper Valve

Provide: duct diameter (φ110-550mm or custom), quantity, material grade (PP or PVC), color (beige or grey), actuator requirements, application, destination port, and your duct schedule or drawings.

MOQ and lead time are confirmed per project. Request a quote via WhatsApp or email using the contact block below.

Installation & System Integration

Electric air damper valves are joined to the duct run by hot air welding, and the joint is reinforced with a socket connection. The actuator is mounted on the valve and connected to the control supply according to the project specification, so the actuator details are confirmed before production. The same joining method applies to straight duct and other fittings, so the valve becomes part of one welded, sealed system.

Complete systems combine electric damper valves with straight duct, rain caps, elbows and couplings. See the full range of PP duct systems.

Related Products

• Polypropylene Round Ducts
• Manual Air Damper Valve
• PP Back Draft Damper
• PP Duct Rain Cap
• PP 90° Elbow
• Full PP Duct Range
• PP Air Duct Guide – a complete guide to PP duct types, sizes and materials.

FAQ

What is an electric air damper valve?

It is an injection-moulded PP or PVC damper fitted into a duct run – an actuator drives the blade to adjust the opening, giving remote or automatic control of airflow volume.

How does it work?

The actuator rotates the blade to a set opening, so the valve can be opened, closed or held at an intermediate position. Because the actuator moves the blade, the damper can be adjusted without manual access to the valve.

What sizes are available?

10 standard sizes from φ110mm to φ550mm: φ110, φ160, φ200, φ250, φ315, φ355, φ400, φ450, φ500 and φ550mm – plus custom sizes made to order.

Electric or manual damper – which should I choose?

An electric damper valve is driven by an actuator for remote, automatic or control-system adjustment. A manual air damper valve is adjusted by hand at the duct. Choose electric where the damper must respond to a controller.

What material is it made from?

The valve is injection moulded in PP (polypropylene) or PVC, in beige or grey. Working temperature and service limits follow the material grade selected.

What do I need to provide for a quote?

Duct diameter, quantity, material grade (PP or PVC), color, actuator requirements, application, destination port, and your duct schedule or drawings.